The OMAX 2652 offers a small footprint for space-challenged shops, allowing plenty of cutting envelope.
- Cutting envelope of 4' 4" x 2' 2" (1.32 m x 0.66 m)
- ±0.001" (±0.025 mm) linear position accuracy
Ampliar todo
- Backed by OMAX’s exclusive IntelliMAX Premium Software
- Robust and accurate design for tight tolerance cutting and reliable operation
- Pre-loaded linear bearings and precision ball screws
- Shipped as a completely pre-assembled and factory-tested system
- Standard programmable Motorized Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency
- Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONES Y ESPECIFICACIONES
Footprint (with pump) | 12' 1" x 6' 3" (3.68 m x 1.91 m) |
---|---|
Height (with scissor plumbing) | 8' (2.44 m) |
Operating Weight | 10,252 lb (4,650 kg) |
Weight (tank empty) | 4,300 lb (1,950 kg) |
X-Y Cutting Travel* | 4' 4" x 2' 2" (1.32 m x 0.66 m) |
Z-Axis Travel (with Motorized Z Axis)* | 8" (203 mm) |
Table Size | 5' 9" x 2' 6" (1.75 m x 0.76 m) |
Material Supports Slats | 4" x 1/8" Galvanized Steel |
---|---|
Maximum Supported Material Load | 400 lbs/sq ft (1,950 kg/sq meter) |
Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
Noise Level | Below 80 dBA at one meter for submerged cutting |
Speed | 180 in/min (4.57 m/min) |
Linear Positional Accuracy* | ±0.001" (±0.025 mm) |
Repeatability* | ±0.001" (±0.025 mm) |
Ballbar Circularity* | ±0.0025" (±0.064 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
INFORMACIÓN SOBRE BOMBAS
Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
EnduroMAX 100 HP | EnduroMAX 50 HP | EnduroMAX 30 HP | DynaMAX 575P | |
---|---|---|---|---|
Motor Power | 100 HP (75 kW) | 50 HP (37kW) | 30 HP (22 kW) | 75 HP (56 kW) |
MAX Jet Power | 85 HP (63 kW) | 42.5 HP (31.5 kW) | 25.5 HP (18.7 kW) | 51.6 HP (37.9 kW) |
Output Pressure | 60,000 psi | 60,000 psi | 60,000 psi | 60,000 psi |
Orifice & Flow Rate ** | 0.022" / 2.25 gpm (0.56 mm / 8.52 lpm) | 0.016" / 1.20 gpm (0.41 mm / 4.54 lpm) | 0.012" / 0.67 gpm (0.30 mm / 2.54 lpm) | 0.017" / 1.5 gpm (0.43 mm / 5.68 lpm) |
Footprint LxWxH | 44" x 62" x 44" (1,118 mm x 1,575 mm x 1,118 mm) | 66" x 36" x 38.5" (1,676mm x 914mm x 978mm) | 66" x 36" x 38.5" (1,676mm x 914mm x 978mm) | 40" x 79" x 59" (1016 mm x 1996 mm x 1509 mm) |