The pinnacle in high-performance precision abrasive waterjet cutting machining.
- Cutting envelope of 13' 4" x 6' 8" (4.06 m x 2.03 m)
- ±0.001" (±0.0025 mm) linear position accuracy
Alle erweitern
- Backed by our exclusive IntelliMAX Premium Software
- Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback
- 12-inch (305 mm) programmable Z axis travel with lowest ceiling height requirement design in the industry.
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dBA
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
MASSE & TECHNISCHE DATEN
80X | 80X-1 | |
---|---|---|
Footprint (with pump & controller) | 26' x 12' 11" (7.92 m x 3.94 m) | 32'8" x 12'11" (9.96m x 3.94m) |
Height (with Scissor plumbing) | 10' (3.05 m) | 10' (3.05 m) |
Operating Weight | 49,575 lb (22,487 kg) | 65,900 lb (6.09m x 2.03m) |
Weight (tank empty) | 9,150 lb (4,150 kg) | 9,150 lb (4,150 kg) |
X-Y Cutting Travel* | 13' 4" x 6' 8" (4.06 m x 2,03 m) | 20'0" x 6'8" (4.06 m x 2,03 m) |
Z-Axis Travel (with Motorized Z Axis)* | 12" (304 mm) | 12" (304 mm) |
Table Size | 15' 1" x 7' 2" (4.60 m x 2.18 m) | 21'9" x 7'2" (6.63m x 2.18m) |
Material Supports Slats | 4" x 1/8" Galvanized Steel |
---|---|
Maximum Supported Material Load | 400 lbs/sq ft (1,950 kg/sq meter) |
Electrical Requirements | 3-Phase, 380-480 VAC ±10%, 50-60 Hz |
Noise Level | Below 80 dBA at one meter for submerged cutting |
Speed | 350 in/min (8.89 m/min) |
Linear Positional Accuracy* | ±0.001" (±0.025 mm) |
Repeatability* | ±0.001" (±0.025 mm) |
Ballbar Circularity* | ±0.003" (±0.076 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
![Watch Video](/sites/default/files/styles/convert_to_webp/public/2023-08/machine-video-right.webp?itok=VWukudd0)
PUMPENDATEN
Maximized uptime with 1,000 hours between maintenance cycles
Increased production by delivering 30% more cutting power
Variable Frequency Drive reduces startup power consumption and maximizes operating flexibility
EnduroMAX 50 HP | EnduroMAX 40 HP | EnduroMAX 30 HP | |
---|---|---|---|
Motor Power | 50 HP (37kW) | 40 HP (30kW) | 30 HP (22 kW) |
MAX Jet Power | 42.5 HP (31.5 kW) | 34.0 HP (34 kW) | 25.5 HP (18.7 kW) |
Output Pressure | 60,000 psi | 60,000 psi | 60,000 psi |
Orifice & Flow Rate | 0.016" / 1.20gpm (0.41 mm / 4.54 lpm) |
0.014" / 0.92gpm (0.36 mm / 3.48 lpm) |
0.012" / 0.67 gpm (0.30 mm / 2.54 lpm) |
Footprint LxWxH | 66" x 36" x 38.5" (1,676mm x 914mm x 978mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm) |
66" x 36" x 38.5" (1,676mm x 914mm x 978mm |