GlobalMAX
2040
JETMACHINING CENTER
The GlobalMAX 2040 abrasive waterjet is a value-focused abrasive waterjet that can cut almost any material and a wide variety of thicknesses.
- Cutting envelope of 13’ 3” x 6’ 8” (4.03 m x 2.03 m)
- ±0.003" (±0.076 mm) linear position accuracy
Expand all
- IntelliMAX Global software uses our 4th generation cutting model to deliver the fast and efficient cutting
- Innovative Omega Drive System provides smoother transition from rotary motion to linear motion compared to traditional rack and pinion drive systems
- Omega Drive tooth engagement minimizes backlash and improves reliability
- Designed and manufactured at the OMAX factory in Kent, Washington, USA
- Does not create heat-affected zones or mechanical stresses
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
- No tool changes & minimal fixturing dramatically reduce setup
DIMENSIONS & SPECS
| Footprint (with pump) | 15' 11" x 13' 5" (4.85 m x 4.09 m) |
|---|---|
| Height (with whip plumbing) | 9' 3" (2.82 m) |
| Operating Weight | 18,421 lb (8356 kg) |
| Weight (tank empty) | 5887 lb (2670 kg) |
| X-Y Cutting Travel* | 13' 3" x 6' 8" (4.03 m x 2.03 m) |
| Z-Axis Travel (with Motorized Z Axis)* | 5" (127 mm) |
| Table Size | 13' 7" x 7' 2" (4.14 m x 2.18 m) |
| Maximum Supported Material Load | 100 lbs/sq ft (488 kg/sq meter) |
|---|---|
| Electrical Requirements | Varies depending on configuration. (See pump specs.) |
| Noise Level | Below 80 dBA at one meter for submerged cutting |
| Speed | 500 in/min (12.7 m/min) |
| Linear Positional Accuracy* | ±0.003" (±0.076 mm) |
| Repeatability* | ±0.001" (±0.025 mm) |
| Ballbar Circularity* | ±0.007" (±0.178 mm) |
* Accessories may reduce travel. Accuracy specifications are at 72° F (22° C).
PUMP INFO
Direct Drive technology proven in thousands of installations worldwide
Efficient GlobalMAX pumps convert over 85% electrical power to pure cutting power
| GlobalMAX 30 HP | GlobalMAX 20 HP | GlobalMAX 10 HP | |
|---|---|---|---|
| Motor Power | 30 HP (22 kW) | 20 HP (15 kW) | 10 HP (7.5 kW) |
| MAX Jet Power | 25.5 HP (19 kW) | 17 HP (12.5 kW) | 7 HP (5.2 kW) |
| Output Pressure | 45,000 psi | 45,000 psi |
30,000 psi |
| Orifice & Flow Rate ** | 0.015" / 0.96 gpm (0.33 mm / 3.63 lpm) |
0.012" / 0.62 gpm (0.30 mm / 2.35 lpm) |
0.011" / 0.40 gpm (0.28 mm / 1.51 lpm) |
| Footprint LxWxH | 52.5" x 31" x 42" (1,334 mm x 787 mm x 1067 mm) |
52.5" x 31" x 42" (1,334 mm x 787 mm x 1067 mm) |
